50mm PTFE Vent Filter
Product name : 50mm PTFE Vent Filter
Model No. : MFPTFE50-022
Products Category: > Labfiltration > Air Vent Filter 17805
Micropore air vent filter 17805 is with 0.22μm PTFE media，is also equivalent with Vent filters, Midisart 2000 17805 is also called vacuum protection filter or gas line filter, They are designed for the removal of particles and micro-organisms for venting and gases. Which are ideal for sterilizing gases,venting sterile containers,sterilizing or clarifying organic solutions and protect laboratory. The special construction allows minimal hold-up volume and particle shedding, making it ideally suited for the critical needs of the pharmaceutical and biotechnology industries.
Applications:
Ø Sterile venting of small fermenters
Ø Sterile venting of small containers
Ø General sterile filtration of gases and air
Features:
Ø Autoclave, ideal for use with bioreactors and fermenters.
Ø Have broad chemical resistance
Ø Large surface area provides greater throughtput and permits higher air flow rates
Technical Parameter
Pore Size(μm) | 0.1, 0.22, 0.45,0.65,0.8,1.0,1.2 |
Filter Media | PES/Nylon66/PTFE/PP/GF/PVDF |
Support & Housing | PP (Polypropylene) |
Sealing Technology | Thermal Bonding, No Adhesives |
Dimensions | Outer Diameter Φ65: PTFE, Φ60: PES/Nylon66/PP/GF/PVDF Inlet/Outlet: 7~13 mm stepped hose barb connection with 6:100 Luer slip |
Filtration Area, ft2 | ≥0.021 |
Bubble Point & Air Flow Rate | (PTFE 0.22 μm, 0.01 μm for air & gas) Bubble Point: ≥ 900 mbar with 60/40% IPA/water Air Flow Rate: ≥ 25 L/min at 1 bar |
Maximum Operating Pressure | Forward: 3.5 bar @ 23℃ and 3.0 bar @ 60℃ for liquid, 3.0 bar @ 23℃ and 2.5 bar @ 60℃ for air & gas |
Bacterial Retention | (for 0.22 μm PES/PTFE ): Passed the bacterial challenge testing using Brevundimonas diminuta(ATCC19146) at a minimum challenge concentration of 1×107 CFU/cm2 |
Biological Safety | Meets GB/T 14233.2 <2005> of Chinese National Standard for Safety Tests |
Sterilization | By EO or 3 autoclave cycles of 30 min at 123 ℃; steam-in-place sterilization not recommended |
Good Manufacturing Practices | Manufactured in an Micropore facility which adheres to Good Manufacturing Practices. |
Order informations:
Cat No | Description | Membrane | Pore Size(μm) | Diameter (mm) | Package |
MFPTFE50-022 | Inlet/Outlet：Stepped Hose Barb | Hydrophobic PTFE | 0.22 | 50 | 25 |
MFPTFE50-045 | Inlet/Outlet：Stepped Hose Barb | Hydrophobic PTFE | 0.45 | 50 | 25 |
MFPTFE50-100 | Inlet/Outlet：Stepped Hose Barb | Hydrophobic PTFE | 1.0 | 50 | 25 |
Note：Single packed and with Gamma sterilized is available.
Download PDF：
Send Inquiry :
Featured Products
Contact Us
Name: Joshua Chen
Tel: +86-576-88017798
Fax: +86-576-88698337
Mobile: +86-18159196507
E-mail: [email protected]
Whatsapp: +86 18159196507
Skype: joshua.ms
